SolidWorks 2020 Full License Code Archives

SolidWorks 2020 Full License Code Archives

SolidWorks 2020 Full License Code Archives

SolidWorks 2020 Full License Code Archives

Installing or upgrading the SolidNetwork License Manager (SNL) for SOLIDWORKS 2020

If you are running the network version of SOLIDWORKS, every new version requires the license manager to be upgraded. The newest version that the clients are using will be the version that the SNL manger will need to be upgraded to. The license manager is backwards compatible with all older version of SOLIDWORKS along with PDM licenses.

The update is straight forward and takes little time to accomplish. There are a few things to watch out for however.

The first step you want to do, is to make sure that there are no borrowed licenses out. If the server is upgraded when a borrowed license is pulled, the client will run into errors when trying to return the license with the new license manager.

Now with all borrowed licenses returned, the next step is to de-activate the license. If this is not done, you may have problems re-activating the license even though it is on the same computer.

Select the “Server Administration” tab, then select the “Modify” button.

Once selected, check the option to “Move your product licenses to a new/upgrade computer”.

If you have more than 1 serial number, select the “Select All” option.

Once the license has been de-activated, you can then procced to the upgrade.

You can use the same media/download as you would use for the clients, however you will want to select “Server Products” from the menu. With the license manager being previously installed. It should default to this option. You will get a notice about a pending reboot, but you will see this always by default even if you have rebooted. It is recommended to reboot before the install, but it is not required.

For a NEW install of the SNL manager follow these instructions

Fill in your serial number and click next.

Check the terms acceptance box and then download and install.

Launch the SNL manager from the Windows Start menu, it will be located under SOLIDWORKS 2020 Tools, SolidNetwork License Manager Server. Then you will see this message. Go ahead and click yes.

Verify the information on the next screen and click next.

Select your serial number(s) and next.

Verify the information on the this last page an you’re done!

For UPDATING a SNL manager follow these instructions:

Be sure to return all borrowed licenses as described at the beginning of this blog.

Select the option to upgrade the license server.

You should not be required to re-enter your serial number since this stored in the registry and does not get removed by default.

Once the installation has been completed, there is still one major step to finish. You are still required to re-activate.

Launch the license manager once. It will prompt you to re-activate.

Run through the process of re-activating. Once this is complete, you are good to go!

John Van Engen
Support Team Leader
Computer Aided Technology

Источник: []
, SolidWorks 2020 Full License Code Archives

SOLIDWORKS 2020 Update frequently asked questions

Get your SOLIDWORKS 2020 Update frequently asked questions answered below:

SOLIDWORKS 2020 Update General Information

Review our SOLIDWORKS 2020 update general topic questions:

How can I learn about the new features in SOLIDWORKS 2020?

What Windows Operating Systems will be supported by SOLIDWORKS 2020?

The following operating systems are supported by SOLIDWORKS 2020:

  • Windows 7 SP1, 64-bit
  • Windows 10, 64-bit
*SOLIDWORKS 2020 is not supported on Windows 8.1 *Windows Home Editions are not supported *Only Microsoft Windows networking is supported *Novell networks and non-Windows network storage devices are not supported *IMPORTANT: Windows 7 support will end with SOLIDWORKS 2020 SP5

Please see the SOLIDWORKS System Requirements for additional information.

Are Virtual Environments Supported?

Only select Virtual Environments are supported.  Please see the SOLIDWORKS Virtual Environments support page.

NOTE – Virtual environments require a certified GPU for proper performance of SOLIDWORKS, eDrawings and Draftsight.

Certified GPU drivers for virtual environments can be found on the SOLIDWORKS Hardware Certification page.

(Choose “Virtual Desktop” from the Computer Vendor dropdown)

Will SOLIDWORKS 2020 files open in previous major releases (i.e. in SOLIDWORKS 2019)?

The Previous Release Interoperability functionality allows 2020 parts and assemblies to be opened in SOLIDWORKS 2019 SP5, with limited functionality.

Can I run any third party add-in or custom program with SOLIDWORKS 2020?

  • SOLIDWORKS Gold Partner companies have 30 days from the release of SOLIDWORKS 2020 to support the latest version. Check with the Gold Partner that their add-in product is compatible before upgrading. Click here for Gold Partner product details.  Select “Refine your Search with Criteria” and click the checkbox “Show Certified GOLD Partner Products Only”
  • Support Partner (Non-Gold) companies support the latest release on their own schedule. Check with the Solution Partner that their add-in product is compatible with SOLIDWORKS 2020 before upgrading. Click here for Solution Partner product details
  • Custom programs/add-ins should be checked to ensure they are compatible with the latest release.

SOLIDWORKS 2020 Installation

Review our SOLIDWORKS 2020 update installation frequently asked questions:

What is the SOLIDWORKS 2020 Installation Manager?

Each release of SOLIDWORKS has its own Installation Manager.  This is a standalone application that can download/update/upgrade/install/modify/repair all SOLIDWORKS products.  It can be used to create and manage administrative images and standalone installs all within the same user interface.  The Installation Manager can be downloaded from the SOLIDWORKS Customer Portal for each version/service pack.

How does the SOLIDWORKS 2020 Installation Manager work?

The SOLIDWORKS 2020 Installation Manager uses Windows Installer and installs all products silently passing the required parameters to the installations.  You can specify a folder location for the installation.  This location will be used as the root folder for the installation of all products.

The list of installed programs within the Windows Control Program will show a single line for SOLIDWORKS 2020.  This can be used to modify or uninstall any of the SOLIDWORKS Products within a single interface.

What should I do before I upgrade to SOLIDWORKS 2020?

Review our SOLIDWORKS Upgrade Checklist and PDM Upgrade Checklist articles prior to an upgrade.

What’s the recommended installation procedure, to upgrade or to perform a new installation?

Both installation methods are supported. Updating your existing SOLIDWORKS installation can be done if users no longer require the prior version still on their system.  A new installation will leave existing installations and install separately.

Can I have more than one version of SOLIDWORKS installed on my system at the same time?

Yes, it is possible to have multiple versions of SOLIDWORKS on the same system.  During install, choose the option for a new installation and specify separate paths for the install directory and the Toolbox directory.

Review the section “Installing SOLIDWORKS with Unique Install Directories” in our SOLIDWORKS Installation & Setup FAQs found on our Technical Support page.

Can I directly upgrade to SOLIDWORKS 2020 from SOLIDWORKS 2018 or prior?

You do have an option to perform a direct upgrade to SOLIDWORKS 2020 from a major version prior to SOLIDWORKS 2019.

If you are skipping several major versions (i.e. SOLIDWORKS 2016 to 2020), it’s typically best to uninstall your current version and install the latest version as a new installation.

To ensure a clean installation of SOLIDWORKS 2020, review our SOLIDWORKS Complete Uninstall Guide to remove all previous installations.

How do I upgrade a SOLIDWORKS Toolbox database in a shared environment?

When a SOLIDWORKS Toolbox directory is located on a shared server location, upgrading the local client SOLIDWORKS installation may not update the database.  Review our Toolbox Upgrade article for steps to upgrade the Toolbox.

Where can I find more information on SOLIDWORKS Installations?

Review our Installation Guides on our Support page:

For more detailed information on installations, review the SOLIDWORKS Administration Guides.

SOLIDWORKS 2020 Standalone Licensing – Node Locked

Review our SOLIDWORKS 2020 update frequently asked questions for standalone licensing:

Do I need a new serial number to install SOLIDWORKS 2020?

If your license includes Subscription Service, your existing serial number will automatically be upgraded for SOLIDWORKS 2020.  During the installation and activation, the serial number will be authenticated for its validity with the SOLIDWORKS 2020 release.

What is Product Activation?

Product activation is a secure, hassle-free process that authenticates licensed users during the installation process. For more information regarding product activation please refer to the SOLIDWORKS Activation FAQ.

If I do not have internet access on my SOLIDWORKS workstation, how will I activate my product?

Activation requires an internet connection or email access. After successful activation, you do not need to be online to use the products.

If you do not have internet access on the computer where SOLIDWORKS is installed, you can choose the Manual activation method to Save an activation request file.  This file can be transferred to another computer with internet access (i.e. via a USB key).  Email the file to  You will receive an email response within a few minutes with an activation response file.  Copy this file back to the SOLIDWORKS workstation and continue through the Manual activation method but select to Open the authorized activation file.

SOLIDWORKS 2020 SolidNetWork Licensing (SNL) – Floating

Review our SOLIDWORKS 2020 update frequently asked questions for SNL:

How is network (floating) licensing handled in SOLIDWORKS 2020?

SOLIDWORKS 2020 continues to use the same SolidNetWork License Manager to provide network licenses for all SOLIDWORKS products.  SOLIDWORKS PDM Standard and PDM Professional licenses use the same SolidNetWork License Manager in 2020.

  1. A server on your network hosts the SolidNetWork License Manager Server application for activation of all network licenses
  2. Clients connected to the same network obtain licenses from the server on opening SOLIDWORKS.  When SOLIDWORKS is closed, the license is returned to the server.
  3. License borrowing is available to lock licenses to a machine when disconnected from the network

What Operating Systems are supported for the SolidNetWork License Manager?

Review the section “SOLIDWORKS Network License Server” on the SOLIDWORKS System Requirements page.

Can SOLIDWORKS, Simulation, Composer, Electrical, PCB, Plastics, CAM, Visualize and PDM products run from one license manager tool?

Yes, users can manage all SOLIDWORKS product licenses using one utility.  During installation, you can enter multiple serial numbers separated by commas.  You will need to install the License Manager on a server, accessible by all clients.  Please review the “SOLIDWORKS Installation Guide Network License” on our Support page.

Why are the clients not able to obtain a SOLIDWORKS license from the server?

Firewalls may be preventing the communication between the client and server machines.  Review our SOLIDWORKS SolidNetwork License Manager Troubleshooting article for possible solutions.

Do clients have access to view licenses currently in use?

Yes, SOLIDWORKS client installations will include a SolidNetWork License Manager Client application.  This can be accessed through Windows Start > SOLIDWORKS 2020 Tools > SolidNetWork License Manager Client 2020.  Check the License Usage tab and select the required product from the dropdown.

Can the 2020 SolidNetWork License Manager support prior versions of SOLIDWORKS?

Yes, the License Manager is backwards compatible so the SOLIDWORKS 2020 License Manager will support all earlier versions of the software (since activation was introduced in 2008).

However the License Manager will always need to be on the same major version or newer.  For example, SOLIDWORKS 2020 will not work with the 2019 SolidNetWork License Manager.

Why do I see extra SOLIDWORKS Standard licenses on the “License Usage” tab in the SolidNetwork License Manager?

A SOLIDWORKS Standard license is always required to be checked out when opening SOLIDWORKS.  When an add-in that requires a higher license is enabled, the Professional or Premium license is checked out, but it keeps a Standard license checked out at the same time.

For example if you have purchased one (1) SOLIDWORKS Standard license and two (2) SOLIDWORKS Premium licenses, the License Manager will show a total of three (3) Standard licenses since two are required for the Premium version.

What is the “License Order” tab in the SolidNetwork License Manager?

The License Order tab allows you to change the order of product taken from the server if multiple levels of products are available on the network.  For example, Simulation products have various levels (SOLIDWORKS Premium, Simulation Standard, Simulation Professional, Simulation Premium).  This can also apply to other licenses such as SOLIDWORKS Visualize Standard and Visualize Professional.

In SOLIDWORKS 2020, the Simulation add-in was enhanced for the ability to choose which license to use when enabling the add-in, rather than needing to use the License Order tab.

What is the “License Borrowing” tab in the Network License Manager?

If a computer will be disconnected from the network due to travel or working from home, you can borrow a license for a specified period.  This locks a SOLIDWORKS license on the computer and allow you to launch the program without being connected to your work network.

Borrowing a Professional or Premium license automatically borrows the pre-requisite SOLIDWORKS Standard license.

How do I upgrade to the 2020 SolidNetWork License Manager?

You can upgrade an existing SOLIDWORKS SolidNetWork License Manager to a new version using the SOLIDWORKS Installation Manager, rather than uninstalling the previous version.

IMPORTANT: Once the upgrade is complete, reactivate the License Manager to obtain the 2020 licenses.

Can I use a remote desktop application to install and activate the License Manager on a server?

Avoid using a remote desktop application as this can cause a change to the Computer Identifier of the server during activation. This may cause a mismatch of the hardware ID and an Activation Count Exceeded error may occur and the activation will fail.

Where can I find more information about SolidNetWork License installations?

Review our “SOLIDWORKS Installation Network License” document on our Support page

SOLIDWORKS 2020 Activation

Review our SOLIDWORKS 2020 update activation procedures for standalone and network licenses.

Standalone License:

To activate a standalone license:

  1. Start SOLIDWORKS and add-on required (i.e. Simulation).
  2. If you have not yet activated your license, the Product Activation dialog box appears.
  3. Choose the Automatic (recommended) or Manual option.
    Automatic – Submit the request automatically over the internet (requires internet connection)
    Manual – Click Save to create a file, and then send the file to from another computer that has internet access. When you receive the response file, typically within minutes of the initial submission, copy to the client machine and run the activation procedure again and click Open to load the response file.
  4. The Activation/Reactivate Succeeded dialog box displays the products that have been activated.

To transfer a standalone license:

  1. Open SOLIDWORKS on the activated computer
  2. Go to Help > Licenses > Deactivate…
  3. Choose the license to transfer (or select all)
  4. Choose the Automatic or Manual option
  5. Once the transfer is successful, install and activate on the new computer

Network Licensing:

To activate a network license:

  1. Install the SOLIDWORKS SolidNetWork License Manager from the Installation Manager, Server Products
  2. Open the SolidNetWork License Manager Server 2020 from Windows Start > SOLIDWORKS Tools 2020.
  3. Choose Yes when prompted “Would you like to activate now?”
  4. Choose the Automatic (recommended) or Manual option.
    Automatic – Submit the request automatically over the internet (requires internet connection)
    Manual – Click Save to create a file, and then send the file to from another computer that has internet access. When you receive the response file, typically within minutes of the initial submission, copy to the client machine and run the activation procedure again and click Open to load the response file.
  5. The Activation/Reactivate Succeeded dialog box displays the products that have been activated.

To transfer a network license from a server:

  1. Open the SolidNetWork License Manager on the server
  2. On the ‘Server Administration’ tab, click Modify
  3. Select ‘Move your product license(s) to a new/upgraded computer
  4. Choose the Automatic or Manual method and follow the steps
  5. Install and activate the License Manager on a new server
  6. Point all client machines to the new server by opening the SolidNetWork License Manager Client on each machine and add the new server name in the Server List tab

For more information, please review our “SOLIDWORKS Installation Guide Network License” on our Support page

SOLIDWORKS 2020 Online Licensing

Review our SOLIDWORKS 2020 update activation procedures for online licenses.

What is Online Licensing?

Online licensing was introduced with SOLIDWORKS 2018 where you can simply log in on opening SOLIDWORKS to use your license.  Activation is not required so you can log in to SOLIDWORKS from different machines to have access.  Only one machine can have an active session at one time.  Closing SOLIDWORKS will end the session and allow another machine to be logged in.

Specific licenses are assigned to different users, so the proper license is obtained when logging in.  This is specified when setting up online licensing.  This will only apply to standalone licenses (not network/floating licenses).

Review our SOLIDWORKS Online Licensing articles for more information.

Can I use Online Licensing with SOLIDWORKS 2017 or earlier?

No, online licensing is only available for SOLIDWORKS 2018 and onward.  You will still need to use activation-based licensing for prior versions.

How do I enable Online Licensing?

By default, standalone licenses will be set to the original activation-based structure.  The license can be changed to Online by accessing the Admin Portal from a registered account.

Do I need an internet connection to use Online Licensing?

Yes, you require access to the internet while using the online license.  There are “heartbeats” to the SOLIDWORKS server to verify that you are still have an internet connection.  A warning will be given after 15 minutes of lost connection.  After 30 minutes you will be prompted to save all work and asks to shutdown SOLIDWORKS.

What if I need to go offline and still use SOLIDWORKS?

The license can be obtained when connected online and then set to offline mode.  This will lock the license to the machine for up to 30 days, so you can use SOLIDWORKS without an internet connection.

Источник: []
SolidWorks 2020 Full License Code Archives

SolidWorks 2020 Full Premium Download + Active / Activation

SOLIDWORKS Premium is a comprehensive 3D design solution that adds to the capabilities of SOLIDWORKS Professional with powerful simulation, motion, and design validation tools, advanced wire and pipe routing functionality, reverse engineering capabilities, and much more.

Users can test product performance against real life motion and forces with our rich simulation capabilities. Ensure manufacturability and resolve complex assembly issues early in the design process with tolerance stack-up analysis tools. Quickly incorporate printed circuit board data into your 3D model, and create and document layouts for electrical wiring, piping, and tubing with SOLIDWORKS Extended Tools. You can also work with 3D scanned data in SOLIDWORKS Premium. Experience all the benefits of a complete 3D design solution with SOLIDWORKS Premium.

SOLIDWORKS Premium solutions include:

  • Time-Based Motion Analysis
  • Linear Static Analysis for Parts and Assemblies
  • Automated Tolerance Stack-Up Analysis (TolAnalyst)
  • ECAD / MCAD Collaboration (CircuitWorks)
  • Routing of Pipes and Tubes
  • Routing of Electrical Cabling and Wiring Harnesses
  • Reverse Engineering (Scanto3D)
  • Advanced Surface Flattening
  • Routing of Rectangular and Other Sections

System Requirements

Operating System:
Windows 10, 64-bit
Windows 7 SP1, 64-bit

Processor: 3.3 GHz or higher

  • 16 GB or more
  • PDM Contributor or Viewer: 8 GB or more
  • PDM Web Client or Web Server: 8 GB or more
  • ECC RAM recommended

Graphics Card: Certified cards and drivers

  • SSD drives recommended for optimal performance

Disk Space:

  • PDM Contributor or Viewer: 10 GB or more
  • PDM Web Client or Web Server: 5 GB or more
  • PDM Archive Server or Database Server: 50 GB or more
  • SOLIDWORKS Manage: 10 GB or more

Microsoft Excel and Word: 2013 and 2016
Browsers (PDM Web2 Client):

  • Microsoft Internet Explorer, Microsoft Edge,
  • Google Chrome, Mozilla Firefox, Apple Safari


SolidWorks 2020 Full Premium SP0

SolidWorks 2020 Full Premium SP1

SolidWorks 2020 Full Premium SP2

Installation Guide

  1. Block the system connection to the Internet.

  2. Make sure you have NET Framework 3.5 and 4.0 installed on your system.

  3. Run the sw2020_network_serials_licensing.reg file from the Crack folder SolidSQUAD and let the changes be made.

  4. Copy and paste the SolidWorks_Flexnet_Server folder into the C drive.

  5. Run the SolidWorks_Flexnet_Server/server_install.bat file from the folder above with right click as Administrator to install and run a new service called SolidWorks Flexnet Server.

  6. Start the software installation process by running Setup.exe but SolidNetwork License Server (SNL)!

  7. Enter 25734@localhost for License Server.

  8. If the System Check Warning window pops up, ignore it and click Next.

  9. If the message Solidworks serial number was not found in the activation database, ignore it and click OK.

  10. If the list of all Solidorex products is not displayed for installation, click on Select different package and select Select products not included in this package.

  11. If The Installation Manager message could not determine the current subscriptionexpiration date. Would you like to reactivate your license to update this information? Queries on No and then for Do you want to do it later? Click Yes.

  12. After installing the software, copy the two Program Files and Program Files (x86) from the Crack folder and replace the previous files in the software installation drive (default C).

  13. Run the SolidSQUADLoaderEnabler.reg file from the Crack folder and allow the necessary changes to be made.

  14. Restart your system once.

  15. Run SolidWorks>Help>SolidNetWork License Manager>License Order. Select Premium Products, adjust the order as needed. Click Apply and then OK to close SolidNetWork License Manager.

  16. Using the above method, the software is fully activated and can be used without any restrictions. Read the readme.txt file if you need further explanation


免责声明:本站大部分下载资源收集于网络,只做学习和交流使用,版权归原作者所有,请在下载后24小时之内自觉删除,若作商业用途,请购买正版,由于未及时购买和付费发生的侵权行为,与本站无关。本站发布的内容若侵犯到您的权益,请联系站长删除,我们将及时处理! Disclaimer: Most of the download resources on this site are collected on the Internet, and are only used for learning and communication. The copyright belongs to the original author. Please consciously delete within 24 hours after downloading. If you use it for commercial purposes, please purchase the original version. If the content posted on this site violates your rights, please contact us to delete it, and we will deal with it in time!

联系我们 Contact us




Would love your thoughts, please comment.x
Comment Author InfoИсточник: []

What’s New in the SolidWorks 2020 Full License Code Archives?

Screen Shot

System Requirements for SolidWorks 2020 Full License Code Archives

Add a Comment

Your email address will not be published. Required fields are marked *